Download Article

Download Article

Prefinished wooden flooring is a significant investment that you definitely want to protect. While cleaning isn't difficult, there are a few rules that should be followed to keep your floor looking its best. Routine cleaning, such as dry dusting, vacuuming, and damp mopping, is your first line of defense. Spills should be addressed immediately and without excessive force to prevent surface damage from occurring. Using doormats can prevent a lot of issues and help you maintain your flooring for years to come.

  1. 1

    Dust the floors daily with a microfiber mop or cloth. Daily dry dusting will keep your prefinished flooring in peak condition. A mop with a microfiber mop head is probably the easiest tool to use for this. Since prefinished wooden flooring can be scratched by abrasive broom bristles, a microfiber mop is recommended over daily sweeping.[1]

    • If you prefer to use a broom, make sure the bristles are extremely soft.
    • A daily dusting should be sufficient for most areas. If you're dealing with an extremely high traffic area, you may want to make an additional pass each day.[2]

  2. 2

    Vacuum weekly with a natural-bristled brush attachment. Even if you dry dust your floor every day with a microfiber mop, dirt and debris will eventually settle into nooks, crannies, and corners. Combat this with a weekly vacuuming session. Always use an attachment with natural bristles to prevent scratches and damage. Go over the entire floor, giving extra attention to nooks and crannies.[3]

    • Avoid using upright vacuums with beater bars to prevent damage.[4]

  3. 3

    Use a damp microfiber mop as needed. Mild dirt and grime can be cleaned up with a damp mop, no additional floor cleaner required. Wring the mop head out thoroughly and then run it over the floor to remove dirt and debris. After you damp mop, make sure there's no standing water left on the floor. If you see any puddles, wipe them up immediately with a clean towel.

  4. 4

    Use a recommended cleaner and damp mop for stubborn dirt. For significant dirt, you may want to use a floor cleaner along with the damp mop. Your floor manufacturer will provide you with the most appropriate cleaners and products.[5] Follow your product's instructions to create a cleaning solution, dunk your mop into it, and wring it out very thoroughly. Run it over the surface of the floor, focusing on the dirtiest areas and the corners.

    • Prefinished hardwood flooring varies from manufacturer to manufacturer. A cleaner that works well on one surface may cause damage to another. Speak to your floor manufacturer about the best options for your floor.
    • Avoid using products with ammonia and oil soaps on prefinished hardwood. These can be harmful to the wood finish and may leave behind residues that attract additional dust and dirt.

  1. 1

    Clean up spills as soon as they occur. The longer a spill is left on the floor, the deeper the resulting stain will be. Address spills as soon as possible after they happen. Use a clean cotton or microfiber cloth to dab at the spill gently. Don't rub aggressively, because this can cause damage and embed the substance deeper into the floor. Keep dabbing until you've soaked up the spill.

    • If the spill is sticky, use a lightly damp cloth to wipe it away. Dry the area with a microfiber cloth immediately.[6]

  2. 2

    Use a damp cloth on residual stains. If a spill has resulted in a stain, dampen a soft sponge or cotton cloth and wipe gently at the mark. If necessary, dampen the cloth very lightly with a floor cleaner recommended by the manufacturer and wipe at the stain. Do not use aggressive rubbing. This should remove the mark. Gently buff the area dry with a microfiber towel immediately afterward.[7]

    • If you're dealing with an oily or greasy stain, a floor cleaner with a high pH is recommended.

  3. 3

    Clean in the same direction as the wood grain to prevent water spots. Some prefinished flooring may show water spots, even if you're using a very lightly dampened cloth on it. If you notice this on your floor, start cleaning in the same direction as the wood grain. This will help prevent water spots and also make any current ones less noticeable.[8]

  4. 4

    Avoid using anything abrasive on stains. The surface of your floor can be scratched easily by abrasive cleaners and sponges. Even aggressive rubbing with a soft cloth can cause damage and dull the surface of your flooring. Make sure you use gentle actions and tools when dealing with spills and stains.[9]

  1. 1

    Protect the floor by using mats and rugs. Put down area rugs and door mats in high-traffic areas such as entrances and frequently used hallways. Make sure you put down good mats in front of entrance points from the outside, since dirt, water and debris tend to get tracked through these areas the most. [10]

    • You may want to ask your family to remove their shoes at the door as an additional safeguard.

  2. 2

    Use felt floor protectors under chairs and furniture. Felt floor protectors can be purchased at home improvement stores and even some grocery stores. Simply remove the adhesive backing and stick the felt protectors under chair legs, couch legs and other furniture, especially the heavier pieces. Felt protectors can help prevent damage and scratching on the floor's surface.[11]

  3. 3

    Trim your pet's nails regularly. If your pet has nails or claws, they may scratch the surface of your floor and track in dirt. To prevent this, groom your pets frequently and keep their nails trimmed. Cut their nails so that the tips are blunted, with no sharp points.[12]

  4. 4

    Rearrange your furniture every few years. Over time, even well-maintained prefinished flooring will start to show signs of aging, such as dullness, fading and mild scratches. If you leave furniture and rugs in the same place for years at a time, your floor will age unevenly. Move your items around every year or so to prevent this.[13]

Add New Question

  • Question

    I have prefinished wood floors. No matter what I do after I clean it still shows a film and streaks. Do you have any suggestions?

    Michelle Driscoll, MPH

    Michelle Driscoll is the Owner of Mulberry Maids based in northern Colorado. Driscoll received her Masters in Public Health from the Colorado School of Public Health in 2016.

    Michelle Driscoll, MPH

    Founder, Mulberry Maids

    Expert Answer

    The film buildup and leftover streaks may be due to residue that cleaning solutions have left behind. One method to try and remove the residue is to use ammonia and warm water. Sweep and vacuum your floors first, then mix a 1/2 cup of ammonia in 1 gallon of warm water. Mop the floor, and then wipe and buff the floor with a microfiber cloth by hand. Note that you should not use ammonia for regular wood floor cleaning.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit


  • While cleaning hardwood floors is important, you also need to avoiding over-cleaning . Over-cleaning may damage your finish and ultimately cause your floors to wear down faster.

Things You'll Need

  • Microfiber mop
  • Vacuum cleaner with a soft-bristled attachment
  • Floor cleaner recommended by the manufacturer
  • Towels
  • Felt floor protectors

References

About This Article

Thanks to all authors for creating a page that has been read 31,873 times.

Reader Success Stories

  • Naomi

    "I had hardwood floors installed in my home, and was so pleased with your articles on how to maintain the beauty of..." more

Did this article help you?